Handbag Product Design from Cordura Fabric Waste (upcycling fashion) Through Material Exploration Approach
Abstract
This research is a continuation of the previous series of Design Projects, namely the design of bag products from cordura fabric waste, but this research is focused on handbag products. the approach used in this study is material exploration so that the focus of the research is in the form of product creations produced from selected explorations, this research is motivated by the opportunity of no utilization of cordura fabric waste produced by CV Akhtar Bag Makers and the continuation of previous projects that have not been optimal. This design goes through a different exploration process than before, namely by giving different treatments such as sewing, heating, and steaming. The method used in this design is design by doing, and at the end of the research an output was produced in the form of a prototype of handbag products from cordura fabric waste or upcycling fashion that has a selling value. The novelty of this study is that there are no handbag products from cordura fabric waste that go through the exploration process carried out.
Downloads
References
J. D. Sasmita dan A. Bahrudin, “BIJI SAWIT SEBAGAI MOTIF PADA HANDBAG WANITA,” Relief J. Craft, vol. 1, no. 1, Art. no. 1, Des 2021, doi: 10.26887/relief.v1i1.2174.
A. H. Zaki, F. Sadika, dan T. S. Pambudi, “Perancangan Produk Upcycling Limbah Plastik Hasil Olahan Ikm,” EProceedings Art Des., vol. 7, no. 2, Art. no. 2, Agu 2020, doi: 10.25124/eoe.v7i2.12387.
M. Ghifari dan A. Masri, “Perancangan Desain Produk Speaker Bluetooth Bahan Baku Bonggol,” J. Desain Indones., vol. 4, no. 2, Art. no. 2, Sep 2022, doi: 10.52265/jdi.v4i2.197.
A. Rachman, A. E. N. R, dan G. Nugrahadi, “Learning Materials and Learning Methods in Materials for Product Course Basic Product Design Education,” J. Desain Indones., vol. 1, no. 2, Art. no. 2, Des 2019, doi: 10.52265/jdi.v1i2.25.
M. P. M dan M. D. Permanasari, “PENGEMBANGAN PENGOLAHAN PEWARNA ALAMI DENGAN TEKNIK FABRIC MANIPULATION PADA PRODUK SARANA BAWA,” FAD, Sep 2021, Diakses: 23 Januari 2023. [Daring]. Tersedia pada: https://eproceeding.itenas.ac.id/index.php/fad/article/view/211
D. A. Istanti, “PERANCANGAN PRODUK TAS WANITA DENGAN PENGGUNAAN TEKNIK PATCHWORK DAN PEMANFAATAN LIMBAH KULIT PADA BRAND DIT,” Thesis, Universitas Ciputra Surabaya, 2018. Diakses: 2 Februari 2023. [Daring]. Tersedia pada: http://dspace.uc.ac.id/handle/123456789/1714
5.jpg){kind=logo}
